3D Puff Heat Transfer Vinyl
Sold out
Coming soon
This vinyl is temporarily unavailable while we bring on a new supplier. Sign up to our newsletter below and we'll let you know as soon as it's back in stock.
3D puff heat transfer vinyl rises when pressed, giving lettering and logos a raised, foam-like finish that stands off the fabric. It cuts and weeds like standard HTV on Cricut, Silhouette, and other craft cutters.
How to apply
Mirror your design and cut with the shiny carrier side down. Weed away the excess, then press at around 285°F (140°C) for 10–15 seconds with medium pressure — the lower temperature lets the vinyl puff without scorching. Peel warm.
Good to know
- Raised 3D texture — best on bold lettering and simple shapes
- Fine detail and thin lines don't puff well
- Don't layer other vinyl on top of puff
- Suitable for cotton, polyester, and blends
- Wait 24 hours before the first wash, then turn inside out and wash cold
See our HTV heat settings guide for full temperature and peel details.
How to apply HTV
1. Mirror your design and cut it from the vinyl (carrier/shiny side down).
2. Weed away the excess vinyl.
3. Press at about 305°F (150°C) for 10–15 seconds with firm, even pressure — a heat press or a household iron both work.
4. Peel the carrier sheet (warm or cold, depending on the vinyl).
Works with Cricut, Silhouette, and other cutting machines. Exact settings can vary by finish — check the product details above.
Shipping & returns
Mystery Packs ship from the US within 2–3 business days. Free US shipping on orders over $50.
Not satisfied? Return unused vinyl within 30 days — just reach out to our support team and we'll make it right.